KannaMill: Performance
Hammer mills for hemp extractors
KannaMill Performance Series mills for extractors and producers are designed for the highest possible production rates at the ideal finished particle size. These mills are ideal for processing hemp biomass to an ideal particle size for downstream drying efficiency, or post drying to further size the product in preparation for extraction.
The Kannamill® Performance Series offers mid to high range production hammer mills that are available with a horsepower range between 50-600HP across ten standard mill sizes. These mills operate at either 3600 rpm or 1800 rpm depending on the application. They may also be configured for pneumatic or gravity discharge. The mill arrangement offers a dual directional rotor and easy access to the mill grinding chamber for maintenance and cleaning through large hinged access doors on both sides of the mill.
These mills are available in standard carbon steel, 304 stainless steel or food grade stainless steel if required.
Technical Specs
Model |
24-10 |
24-15 |
24-20 |
24-24 |
Housing |
½” |
½” |
½” |
½” |
Shaft |
2 ¾” |
2 ¾” |
3 ¼” |
3 ¼” |
Rotor Width |
10” |
15” |
20” |
24” |
Rotor |
24” |
24” |
24” |
24” |
Bearing Size |
2 7/16″ |
2 7/16″ |
2 7/16″ |
2 7/16″ |
Power Range |
25-40 hp |
50-60 hp |
75-100 hp |
100-150 hp |
Screen Area |
600 sq in |
900 sq in |
1200 sq in |
1440 sq in |
Tip Speed |
22,600 |
22,600 |
22,600 |
22,600 |
Request More Information